Phrozen Pro 8K Resin Aqua Gray – 1 kilogram

Phrozen Pro 8K Aqua-Gray resin is designed to showcase 3D models in high resolution and works best with the Sonic Mini 8K 3D Printer. With its special formula, Aqua-Gray 8K creates high-quality & extremely intricate 3D models with 8K resolution.

Specifications

• Weight: 1kg per bottle
• Density: 1.1 g/cm3
• Viscosity: 280-380 cps
• Surface Hardness: 85 Shore D
• UTS: 47 MPa
• Tensile modulus: 2256 MPa
• Elongation at Break, EAB: 23 %
• Flexural strength: 54 MPa
• Flexural modulus: 1551 MPa
• Izod notched impact strength: 9.63 J/m
• HDT @0.45MPa: 77 ℃

Operating Instructions
We suggest using resin and printer indoors under well-ventilated conditions.
Avoid exposure to sunlight and indoor luminescence.
Please preserve your resin in a closed opaque bottle to avoid exposure to air.
Do not mix used and non-used resin together.
Please keep the resin out of reach from children.
Do not dump resin. Please cure resin and treat/recycle it as general plastics garbage.

Safety
Do not eat or swallow the resin. Wear goggles to avoid eye contact with resin, if you have eye contact with resin, wash your eyes with water thoroughly.
Resin might cause slight irritation to skin. Wear gloves when handling. Stop using if an allergic reaction occurs.
Resin has a slight odor. We strongly suggest you use it under ventilated conditions.
Suggested safety equipment: gloves, mask, goggles, and lab coat.
Keep resin in room temperature (15 – 35 OC) and dry condition.